Product Advantage

  • 3x faster to install; 3x lighter to ship & handle, & virtually unbreakable
  • It’s used with all types of finishes & applications: epoxy, decorative, and build-up
  • For commercial, industrial, residential, institutional, new & restoration projects
  • Meets & exceeds Environmental Health Department code requirements
  • Water proof
  • Mold resistant
  • Installed in facilities for the US Forest Service, FDA, US Government & Military
  • Comes in boxes of six (6) 8" x 144” pieces
  • Matching 90º and 135º inside & outside  corners are available
  • Installs using basic carpentry tools and skills
  • Under cabinet toe kicks & around curved walls are no problem
    • Can be tacked in place w/ finish nailer until bonding agent cures
    • Overnight & rush jobs are able to  be completed much faster
NOMINAL PHYSICAL PROPERTIES (1) ENGLISH SI TEST METHOD
Density ---- 0.954 g/cm3 ASTM D1505
Melt Index, Condition 190/2.16 ---- 0.40 g/10 min ASTM D1238
Tensile Strength at Yield 2 in/min, Type IV bar 4300 psi 29 MPa ASTM D638
Elongation at Break, 2in/min, Type IV bar 500% 500% ASTM D638
Flexural Modulus, Tangent - 16:1 span: depth, 0.5 in/min 195,000 psi 1340 MPa ASTM D790
ESCR, Condition A (100% lgepal), F 50 100 h 100 h ASTM D1693
ESCR, Condition B (100% lgepal), F 50 80 h 80 h ASTM D1693
Brittleness Temperature, Type A clamp, Type I specimen <-103°F <-75°C ASTM D746


(1) The nominal properties reported herein are typical of the product, but do not reflect normal testing variance and therefore should not be used for specification purposes. Values are rounded. The physical properties were determined on compression molded specimens that were prepared in accordance with Procedure C of ASTM D4703, Annex A1

➤